Product Analysis
Bitumen 60-70
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.06 | Specific gravity @25/25 C |
| D-5 | 60/70, | Penetration @25 C |
| D-36 | 49/56 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 250 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 60-90
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.06 | Specific gravity @25/25 C |
| D-5 | 60/90 | Penetration @25 C |
| D-36 | 40/60 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 232 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 40-50
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.06 | Specific gravity @25/25 C |
| D-5 | 40/50 | Penetration @25 C |
| D-36 | 52/60 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 250 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 85-100
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.04 | Specific gravity @25/25 C |
| D-5 | 85/100 | Penetration @25 C |
| D-36 | 42/49 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 250 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 50-70
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.06 | Specific gravity @25/25 C |
| D-5 | 50/70 | Penetration @25 C |
| D-36 | 49/56 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 250 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 80-100
| Test Method | Specification | |
|---|---|---|
| D-70 | 1.01-1.04 | Specific gravity @25/25 C |
| D-5 | 80/100 | Penetration @25 C |
| D-36 | 42/49 | Softening point C |
| D-113 | 100 min | Ductility @25 C |
| D-6 | 0.2 max | Loss on heating (wt)% |
| D-6 & D-5 | 20 max | Drop in penetration after heating % |
| D-92 | 250 min | Flash point C |
| D-4 | 99.5 min | Solubility in CS2 (wt)% |
| A.A.S.H.O.T.102 | Negative | Spot test |
Bitumen 110-10
| Test Method | Specification | |
|---|---|---|
| BS 4147, Appendix D | 5-12 | Penetration(units 0.1mm) @25 C |
| BS 2000 / part 58 | 115-130 | Softening point C |
| BS 4147, Appendix C | 1.2-1.4 | Density (gr/cm3) @25 C |
| BS 4147, Appendix B | 25-35 | Filler content by ignition(% by mass) |
| BSEN 22592, ISO 2592 | 260 min | Flash point C |
| BS 4147, Appendix F | 15 min | Bend(mm) |
| BS 4147, Appendix E | 1.5 | Sag test @75 C (mm) |